PVC plastic reinforced hose is widely used in industrial life. It is used in the drainage fields of roads, railway subgrades, tunnels, green belts, waste sites and other places. It is also essential in agricultural irrigation. The commonly used specifications of PVC plastic reinforced hoses on the market are: inner diameter 20mm, 25mm, 32mm, 38mm, 45mm, 51mm, 63mm, 76mm, 90mm, 110mm, 125mm, 160mm, 200mm, 250mm, etc. It is a regular specification.
Introduction to the characteristics of PVC plastic reinforced hose:
1. Good performance, corrosion resistance, high impact strength, small fluid resistance, aging resistance, and long service life. It is an ideal material for building drainage and chemical sewage discharge.
2. It is easy to install and weighs only 1/7 of the cast iron pipe of the same diameter, which can greatly speed up the project progress and reduce the construction cost.
3. The inner wall is smooth and not easy to block. The inspection port is uniquely designed and the inspection is easy to operate and does not require anything.
4. Economical and affordable. The overall cost of using PVC plastic reinforced drainage pipes is lower than that of using cast iron pipes of the same specifications, and the maintenance costs are lower.
PVC plastic hose is made of soft PVC material as the pipe wall and hard PVC as the frame support. Temperature resistance range -5℃～70℃ (up to +80℃ in a short time). The surface is smooth and shiny, easy to bend, resistant to pressure and not easy to deform, acid and alkali resistant, high temperature resistant, not easy to freeze and crack and prevent aging. It is mainly used for oil, chemical gas and water passage in urban domestic water supply, sewage discharge, farmland irrigation, coal mines, oil fields, marine equipment and other mechanical and electrical equipment. It is also used for water pumps and air-conditioning drainage; for suction conveying pipes , Particularly suitable for; solids such as dust, powder, fibers, chips and granules; gaseous and liquid media, vacuum cleaners, conveying systems, blowers and compressors, food and pharmaceutical industry, chemical industry; air conditioning and ventilation equipment.
